Designed for the surface. Built for flexibility.
Surface-mounted luminaires bring architectural lighting to spaces where recessed installation isn’t possible—or simply isn’t desired. Choose the size, light output, CCT, optics, and finish to match the application while keeping installation straightforward.
A luminaire body can be molded as one complex piece with mounting points, ribs, openings, etc.
The same cross-sectional shape is extruded continuously and then cut to the required length.
Every aluminum housing in this collection begins as raw metal, not a finished shape.
Aluminum ingots (12# / ADC12-grade alloy) melted in a furnace
Molten aluminum is injected under high pressure into a hardened steel mold
The casting solidifies within seconds under continued pressure
Excess flash along the mold seams is removed
Mounting points and optic seats are CNC-machined to tolerance
Sanded, sealed, and powder-coated in the specified color
Custom-molded forms give outdoor lighting greater flexibility in shape, scale, and integration while maintaining the performance required for exterior environments.
Every fixture is tested before it leaves the facility — not sampled, not spot-checked.
Raw materials and components are checked before production.
Fixtures are checked at each production stage.
Every finished unit is inspected before it ships.
In-house lab testing
Confirms dust and water sealing meets its published rating, critical for a fixture recessed into the ground
Confirms housings and seals hold under rapid temperature swings
Simulates long-term outdoor exposure in temperature and humidity chambers
Confirms beam angle and output match spec
Verifies component strength and finish durability
Confirms wiring and insulation meet safety requirements
What sets us apart
Running the full process in-house — tooling, casting, machining, electronics, and finishing — rather than distributing it across outside subcontractors delivers three concrete advantages:
Machined flange, reamed bolt holes and a seated gasket — tolerance and finish quality visible in a single frame.
Cutting our own tooling in-house means no waiting on an outside toolmaker between order and first unit.
Hundreds of housings from one mold — dimensional repeatability is what holds a spec to the five-hundredth unit.
Standard across the collection
5-year warrantyLED throughout the collection
CCT available in 3000K
Wattage ranges from 6W in accent fixtures to 48W in models built for general illumination
CRI 80
A 5-year warranty is standard
Most fixture families offer more than one beam on the same housing: 9° / 15° / 20° / 24° / 25° / 30° / 33° / 36° / 38° / 45° / 50° / 60°
Directs light at a single point: art, signage, a column.
Specified for general task and circulation lighting.
Distributes light evenly across a room, for ambient use.
Optics
Formulated to resist the yellowing that standard polymer lenses develop under UV exposure.
Used on select models for a more minimal appearance and added impact resistance.
Choose your product and specify it your way.
Our team is here to help at every stage.